Grinder mill/ V Type Grinder machine YCV130

Hyper Pressure V Type Grinder is elaborately designed by our grinder engineers through the customer's production requirement and actual using experience, and also is a kind of new type high performance grinding equipment. Comparing with the traditional trapezium grinder and high pressure supension grinder, it has many advatages. It is widely used in glass, rubber, pesticide, porcelain enamel, paint, phosphate fertilizer and paper making, etc chemical industry. And it is used for grinding the Moh's hardness is below 7, humidity is 6% and non-flammable, non-explosive materials like talcum, barite, calcite, limestone, manganese ore, iron ore, ore, quartz, gypsum, bentonite, etc.

 

 

 

After reducing driving force of the main motor by the gear reducer, when the drive center axis and the quincunx rack fixed on the center axis revolve, under the centrifugal force the roller revolves around the center axis, at the same time parallel swing around the shaft, making the roller compress out side to the ring, thus ensure that the roller and ring has maximum surface contace. At the same time the roller self revolves around the roller shaft, making the material scooped up by the shovel blade to grind, after grinding the powder blew to upper part of the mainframe, the separating by the separator, too coarse powder drops to the grinding room to re-grind, the qualified powder airflows into the cyclone powder collector, through the discharging pipe is qualified product.

 

Roller Assembly of the Hyper-pressure V type grinder is composed of roller sleeve, roller shaft, roller shaft and bearing. Roller sleeve is double tube structure: through the uper and lower two bearing the right tube installs roller shaft and roller, the left tube installs the shaft of roller, the two ends are vertically fixed on the upper part and the lower part of the quincunx rack.

Technical Advantages:
1.New technique (quincunx rack and V type roller device), can directly change the centrifugal force into the grinding force, that is to say centrifugal force equals grinding force, and also the roller parallel swings around the vertical shaft, making the roller compact to the ring, thus ensure that the roller and ring has maximum surface contact, the capacity can be increased 40% . 
2.The separator adopts two types according to the final product fineness, one adopts blade type (80-325 mesh), the other adopts mouse type (200-1250mesh).  
3.Air conveying and final product collecting system all changes negative pressure, secondary high efficient powder catcher makes final product’s collecting more thoroughly.
4.Advanced and reasonable structure; highly low equipment’s vibration; low noise; stable mechanical operation and reliable performance.

 

Hot sale: YCV130 model Grinder mill

Roller Diameter ×Height (mm): 410×210;

Ring Diameter ×Height (mm): 1280×210;

Max.Feeding Size (mm): < 30;

The Final Size (mm): 0.613-0.033;

Capacity (t): 4.2-13.3;

Speed of Main Mill (t/min):103;

Mainframe Power (KW):75;

Mortor Model and Power of Classifier (KW):7.5;

Dimensiom (L×W×H)(mm): 7850×8000×9700.

 

Medium fine type:

Ultrafine type:

Note: the capacity in the table refers to grind limestone, the screen rate of the final product is 80%.
Any change of technical data shall not be advised additionally.

 

------------

Related product:crusher,jaw crusher ,stone crusher,raymond mill ,ball mill

 ------------

Certificate : CE ,ISO9001 , IQNET , GOST

------------

For more pictures and technical parameters,please kindly contact us. We will send you the full specifications of our products in 24 hours.Thanks.

-------------

Vipeak Heavy Industy Machinery Co.,Ltd

Contact Person: Miss Becky.

E-mail: vipeakyang@gmail.com .

Tel : 86-371-67770550. 

Fax : 86-371-67431834 .

Homepage:http://www.grinderpro.com

model	Roller Diameter ×Height (mm)	Ring Diameter ×Height (mm)	Max.Feeding Size (mm)	The Final Size (mm)	Capacity (t)	Speed of Main Mill (t/min)	Mainframe Power (KW)	Mortor Model and Power of Classifier (KW)	Dimensiom (L×W×H)(mm)
YCV95	310×170	950×170	< 25	0.613-0.033	2.95-7.85	130	37	5.5	7100×5900×7900
YCV130	410×210	1280×210	< 30	0.613-0.033	4.2-13.3	103	75	7.5	7850×8000×9700
YCV160	440×270	1600×270	< 35	1.6-0.045	7-30.8	82	132	11	12550×5700×8300
YCV190	460×280	1900×280	< 35	1.6-0.045	11.2-49	66	185	15	11470×6940×9580

Model	Roller Diameter ×Height (mm)	Ring Diameter ×Height (mm)	Max.Feeding Size (mm)	The Final Size (mesh)	Capacity (t)	Speed of Main Mill (t/min)	Mainframe Power (KW)	Mortor Model and Power of Classifier (KW)	Dimensiom (L×W×H)(mm)
YCVX95	310×170	950×170	< 20	325-1250	0.56-4.2	130	37	15	7100×5900×7900
YCVX130	410×210	1280×210	< 25	325-1250	1.12-8.5	103	75	30	7850×8000×9700
YCVX160	440×270	1600×270	< 30	325-1250	1.68-15	82	132	55	12550×5700×8300